The machine is designed for surface preparation of ferrous alloy samples during atomic emission spectral analysis.
The difference between the machine and other similar devices is that the grinding wheel rotates horizontally, is located on a support platform and is closed with a lid, in which there is a small oval hole sufficient for sharpening samples with dimensions up to 115x65 mm2 in plan. The side walls of the hole are closed with a frame. The gap between the frame and the grinding wheel is about 1 mm. When sharpening, the sample is pressed against the side surface of the frame in the direction of rotation of the circle, which is indicated by a pointer. The design of the machine "Corund-300" provides for dust removal using a household or industrial vacuum cleaner. It is provided to turn on the power of the vacuum cleaner at the same time as turning on the grinding machine, which increases efficiency in work. The machine cover is easy to open, which significantly speeds up the replacement of the wheel. The machine is powered by a single-phase AC network and is equipped with a sufficiently powerful motor.
1. | Power supply | 220 V 50 Hz |
2. | Power consumption | 800 VA |
3. | Rotation speed | 1340 rpm < / p> < / td> |
4. | Grinding wheel diameter | 50, 300 mm. |
5. | Circle thickness | 8-20 mm. |
6. | Type of abrasive wheel | meets the requirements of GOST 18895-97 section 4 |
7. | Dimensions of the window for sharpening | 118x70 mm2< / sup> |
8. | Overall dimensions (LxWxH) | (362x434x337) mm3< / sup> |
9. | Weight | 42 kg |
10. | An active dust collector is provided |
|
1. | Grinding machine with a set circle of 300 mm. | 1 pc. |
2. | Adapter for 250mm circle. | 1 pc. |
3. | Set of keys to replace the circle | 1 set |
The design features of the machine provide greater convenience and safety during operation. It is possible to use thin circles. The machine can be installed in the same room with the spectrometers, which will increase the productivity of spectral analysis.
The machine can be installed on the tray table together with the vacuum cleaner.
For sharpening samples of the "fungus" type, thin and sheet samples, and other non-standard samples, there are sets of different holders. A universal device "Vacuum holder of thin samples" for holding such samples has also been developed. It is based on the principle of a suction cup with a constant suction of air through a special micro pump. It can be delivered on an additional order.
4 |
1. | Set of grinding wheels | 4 pcs. |
2. | Vacuum cleaner with hose | 1 pc. |
3. | Set of replaceable vacuum cleaner bags | 5 pcs. |
4. | Podkodny table | 1 pc. |
5. | Diamond pencil for cleaning the surface of the circle | 1 pc. |
6. | Vacuum thin sample holder with a set of suction cups | 1 pc. |
# | The company that uses the device |
---|---|
1 | JSC "ROSATOM", cold processing plant |
2 | IP Muravyov, factory |
3 | ISA LLC, metal analysis shop |